Your Search Results

      • Trusted Partner
        Teaching, Language & Reference
        July 2022

        Africa 2.0

        Inside a continent’s communications revolution

        by Russell Southwood

        Africa 2.0 provides an important history of how two technologies - mobile calling and internet - were made available to millions of sub-Saharan Africans and the impact they have had on their lives. The book deals with the political challenges of liberalization and privatization that needed to be in place to get these technologies built. It analyses how the mobile phone fundamentally changed communications in sub-Saharan Africa and the ways Africans have made these technologies part of their lives, opening up a very different future. The book examines critically the technologies' impact on development practices and the key role development actors played in accelerating things like regulatory reform, fibre roll-out and mobile money. Southwood considers how corruption in the industry is a prism through which patronage relationships in government can be understood.

      • Trusted Partner
        Teaching, Language & Reference
        July 2022

        Africa 2.0

        Inside a continent’s communications revolution

        by Russell Southwood

        Africa wired up provides an important history of how two technologies - mobile calling and internet - were made available to millions of Sub-Saharan Africans and the impact they have had on their lives. The book deals with the political challenges of liberalization and privatization that needed to be in place to get these technologies built. It analyses how the mobile phone fundamentally changed communications in Sub-Saharan Africa and the ways Africans have made these technologies part of their lives. It examines critically the technologies' impact on development practices and the key role development actors played in accelerating things like regulatory reform, fibre roll-out and mobile money. The book considers how corruption in the industry is a prism through which patronage relationships in Government can be understood. The arrival of a start-up ecosystem has the potential to break these relationships and offer a new wave of investment opportunities. The author seeks to go beyond the hype to make a provisional assessment of the kinds of changes that have happened over three decades. It examines how and why these technologies became transformative and seem to have opened out a very different future for Sub-Saharan Africa.

      • Trusted Partner
        Teaching, Language & Reference
        July 2022

        Africa 2.0

        Inside a continent’s communications revolution

        by Russell Southwood

        Africa wired up provides an important history of how two technologies - mobile calling and internet - were made available to millions of Sub-Saharan Africans and the impact they have had on their lives. The book deals with the political challenges of liberalization and privatization that needed to be in place to get these technologies built. It analyses how the mobile phone fundamentally changed communications in Sub-Saharan Africa and the ways Africans have made these technologies part of their lives. It examines critically the technologies' impact on development practices and the key role development actors played in accelerating things like regulatory reform, fibre roll-out and mobile money. The book considers how corruption in the industry is a prism through which patronage relationships in Government can be understood. The arrival of a start-up ecosystem has the potential to break these relationships and offer a new wave of investment opportunities. The author seeks to go beyond the hype to make a provisional assessment of the kinds of changes that have happened over three decades. It examines how and why these technologies became transformative and seem to have opened out a very different future for Sub-Saharan Africa.

      • Trusted Partner
        Teaching, Language & Reference
        July 2022

        Africa 2.0

        Inside a continent’s communications revolution

        by Russell Southwood

        Africa wired up provides an important history of how two technologies - mobile calling and internet - were made available to millions of Sub-Saharan Africans and the impact they have had on their lives. The book deals with the political challenges of liberalization and privatization that needed to be in place to get these technologies built. It analyses how the mobile phone fundamentally changed communications in Sub-Saharan Africa and the ways Africans have made these technologies part of their lives. It examines critically the technologies' impact on development practices and the key role development actors played in accelerating things like regulatory reform, fibre roll-out and mobile money. The book considers how corruption in the industry is a prism through which patronage relationships in Government can be understood. The arrival of a start-up ecosystem has the potential to break these relationships and offer a new wave of investment opportunities. The author seeks to go beyond the hype to make a provisional assessment of the kinds of changes that have happened over three decades. It examines how and why these technologies became transformative and seem to have opened out a very different future for Sub-Saharan Africa.

      • Technology, Engineering & Agriculture
        February 2014

        Automation technology

        by Norbert Becker

        In this standard work, the automation technology is illustrated from a practical point of view with many examples and numerous pictures. Students of engineering sciences, as well as engineers and technicians in training and professional practice, are able to work independently on the state of the art. The additional or revised chapters on machine safety, safety in process engineering systems, explosion protection and configuration extend the book considerably. For almost every chapter there are comprehension questions and exercises, the solution of which is contained in the appendix. Programming exercises, which are provided free of charge online, make it possible to solve simple automation problems in a practical way. Content: introduction Measuring technology, setting technology controls automation components Practical control technology Examples of overriding requirements for automation components (safety in mechanical engineering and process engineering, explosion protection), Project planning (project implementation, R & I flow diagrams, equipment identification) Annex (ARW measures, adjustment rules, solutions)

      • Technology, Engineering & Agriculture
        July 2018

        Practical Guide for Electrical Connectors

        The reference book for device development and the use of electrical connectors

        by Herbert Endres

        This book is a reference work for equipment designers and the use of connectors therein. Every designer and consumer receives answers to questions about design, materials, physical basics, contact surfaces, shielding practices, housing and locking designs and applications. Special chapters highlight the most prominent disciplines for electrical connectors: power electronics on one extreme and high data rates on the other. Finally, various technologies in the production process of electronic assemblies and basic selection criteria for electrical connectors are examined. Even though the market is very large with more than 1000 connector manufacturers, the book gives the user assistance in finding the best connector for the application. From the content: What is a connector The connector components Different termination technologies Insulator materials The contact materials The contact point Various contact surfaces The contact resistance Shielding techniques The locking systems of the connectors Housing and mechanics Why are new connectors being developed? Connectors in power electronics Connector for high data rates Further processing of the connectors in the manufacturing process The connector selection Connector database access in the accompanying online service InfoClick

      • Digital lifestyle
        March 2018

        TETRA Today

        by Various

        TETRA Today is the only publication exclusively dedicated to TETRA digital trunked radio. It aims to inspire and inform the TETRA community. Launched in 2010, this publication provides technical advice, authoritative editorial and commentary spanning all areas of TETRA from articles on training to case studies showing how TETRA is being deployed in real-life safety organizations.

      • Telephone technology
        November 2022

        Voice over IP

        An Introduction to Techniques with SIP

        by Thomas Wübbe

        Since the switch-off of classic telephony technology in 2019, the Session Initiation Protocol (SIP) dominates providers' telephony solutions. This book gives an introduction to this technology. It shows principles as well as the common architecture of Voice over IP with SIP. In addition to differences and changes to the "old" telephone technology, step-by-step methods and requirements for Voice over IP are discussed.Many protocol examples show how SIP works. They help troubleshooting when something does not work. A special practical chapter shows how to do analyses via Wireshark and explains logging in detail. These topics are included: Fundamentals of packet switching and standardization, Internet Protocol (IP) VoIP principle, Architecture of SIP SIP signaling Session Description Protocol (SDP) VoIP and NAT Quality of Service (QoS) Introduction to packet analysis with Wireshark, and Practical exercises.

      • Geographical information systems (GIS) & remote sensing
        January 2009

        Hyperspectral Remote Sensing and Spectral Signature Applications

        by S. Rajendran, S.Aravindran, T.Jeyavel Rajakumar, R. Sivakumar & K.R. Murali Mohan

        Hyperspectral imaging is an emerging modern technique in modern remote sensing that expands and removes capability of multispectral image analysis. It takes advantage of hundreds of continuous spectral channels to uncover materials that usually cannot be resolved by multispectral sensoThis book is a collection of research papers of Indian scientist working in the field of hyperspectral remote sensing and spectral signature applications. This has been organized in a way that all the s are logically connected and can be referred back and the forth one another for more details. The title of hyperspectral remote sensing and spectral signature applications is use to reflect its focus on spectral techniques, i.e. non-literal techniques that are especially designed and developed for hyperspectral imagery rather than multispectral imagery.

      • Geographical information systems (GIS) & remote sensing
        September 2017

        Soil Resources and Its Mapping Through Geostatistics Using R and QGIS

        by Priyabrata Santra, Mahesh Kumar, N.R. Panwar & C.B. Pandey

        This book will provide an exposure to recent developments in the field of geostatistical modeling, spatial variability of soil resources, and preparation of digital soil maps using R and GIS and potential application of it in agricultural resource management. Specifically following major areas are covered in the book.

      • Music recording & reproduction

        Wired for Sound

        Engineering and Technologies in Sonic Cultures

        by Paul D. Greene

        Wired for Sound is the first anthology to address the role of sound engineering technologies in the shaping of contemporary global music. Wired sound is at the basis of digital audio editing, multi-track recording, and other studio practices that have powerfully impacted the world's music. Distinctions between musicians and engineers increasingly blur, making it possible for people around the globe to imagine new sounds and construct new musical aesthetics.;This collection of 11 essays employs primarily ethnographical, but also historical and psychological, approaches to examine a range of new, technology-intensive musics and musical practices such as: fusions of Indian film-song rhythms, heavy metal, and gamelan in Jakarta; urban Nepali pop which juxtaposes heavy metal, Tibetan Buddhist ritual chant, rap, and Himalayan folksongs; collaborations between Australian aboriginals and sound engineers; the production of "heaviness" in heavy metal music; and the production of the "Austin sound." This anthology is must reading for anyone interested in the global character of contemporary music technology.

      • Electronics engineering
        July 2021

        Testing of Electrical Systems, Vol. 1

        Basics, Evaluation criteria, Protection goals

        by Marc Fengel

        Not all testing is the same. What DIN VDE 0100-600 means for installers of electrical systems, DIN VDE 0105-100 is for operators. But even beyond that, comprehensive and broad knowledge is required for testing electrical systems.Volume 1 provides inspectors, experts, consultants, planners and operators with an overview of the planning principles for electrical systems and the requirements for test personnel. It also deals with the legal principles of the german Energy Industry Act (EnWG), Product Safety Act (ProdSG) and Occupational Health and Safety Act (ArbSchG).

      • Technology, Engineering & Agriculture
        December 2023

        Testing of Electrical Systems, Vol. 2

        Conducting initial and repeating inspections

        by Marc Fengel

        While Volume 1 deals with the planning principles of electrical systems, the requirements for test personnel and the legal principles of the German Energy Industry Act (EnWG), Product Safety Act (ProdSG) and Occupational Health and Safety Act (ArbSchG), this Volume 2 provides inspectors, experts, appraisers, planners and operators with a guide to carrying out initial and periodic tests of electrical systems. Practical examples are used to explain the technical background of the individual test steps for inspection, testing and measurement.

      • Technology, Engineering & Agriculture
        December 2023

        Testing of Electrical Systems, Vol. 3

        Test report, Supplementary tests, Typical defects

        by Marc Fengel

        Volume 1 deals with the planning principles, requirements for inspection personnel and the legal basis, Volume 2 serves as a guide for carrying out initial and repeat inspections. Volume 3 concludes with the inspection report and some additional, current inspection topics. It also provides checklists for day-to-day testing and an illustrated overview of typical defects from testing practice.

      • Electronic devices & materials
        July 2023

        Periodic Inspections according to DIN VDE 0105

        Electrical Building Installations and their Equipment

        by Klaus Bödeker, Michael Lochthofen, Kirsten Rohlof

        The assessment of existing electrical installations carries a great deal of responsibility and can be fraught with many more pitfalls than the initial testing of installations.This practical guide takes the electrician step by step through the organisational preparation, technical implementation, evaluation and recording of periodic inspections for both domestic and commercial installations.Naturally, this 5th, updated edition takes into account the current Ordinance on Industrial Safety and Health, VDE 0105-100/A1:2017-06, as well as DIN VDE 0701 and 0702. Topics included: Necessity and consequences of periodic inspections, Obligation to periodic inspection, Protective measures, repeat testing procedures, Periodic inspection in different types of buildings, Periodic inspection of electrical devices/equipment, Periodic inspection of electrical machine equipment and mobile generators, Test equipment, Occupational health and safety during periodic inspection, Preparation of periodic inspections for electricians.

      Subscribe to our

      newsletter